NEC MM2000 MM2000B : MM2000B User Manual - Page 15
Image Input terminals
![]() |
View all NEC MM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1. Introduction 1-3-5. Image Input terminals You can mount various interface boards to any position you want among slots 1 to 4. For removal and installation of the interface board, see page 13. 1 3 2 1.SLOT 1 (MM-VIDEO) MM-VIDEO interface board is standard equipment. 4 2. SLOT 2 (MM-RGB) MM-RGB interface board is standard equipment. Make sure to mount the accessory ferrite clamp core to the end of the RGB signal cable. The ferrite clamp core should be mounted as close to this unit as possible. (1) (2) (3) (4) (1) CVBS Input Connector (BNC Type) Use a 75 Ω coaxial cable and connect it to the Composite Video output connector of a DVD player, or to other equipment. (2) S-VIDEO Input Connectors (2 BNC Type) Use a 75 Ω coaxial cable (2-conductor type) and connect it to the S-Video output connector of a DVD player, or to other equipment. (3) COMPONENT Input Connectors (3 BNC Type) Use a 75 Ω coaxial cable (3-conductor type) and connect it to the Component output connector of a DVD player, or to other equipment. (1) (2) (3) (1) RGB Input Connectors (5 BNC Type) Use a 75 Ω coaxial cable (5-conductor type) and connect it to the display output connector of a personal computer or to other equipment. (2) Audio Input Jacks (RCA-Phono) These Jacks have no function with the Switcher. (3) ACT Indicator Steady green light ........ Shows that this board is selected. (4) ACT Indicator Steady green light ........ Shows that this board is selected. 3. SLOT 3 Use to extend the input terminal. See page 13. 4. SLOT 4 Use to extend the input terminal. See page 13. NOTE • MM-VIDEO interface board and MM-RGB interface board are available as an option. • For details about the available input signals, see page 23. 7
![](/manual_guide/products/nec-mm2000b-mm2000b-mm2000b-user-manual-e03bf9f/15.png)