NEC MM2000 MM2000B : MM2000B User Manual - Page 22
Connecting to a Network
![]() |
View all NEC MM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2. Installation 2-5. Connecting to a Network Connect various control terminals as required. The switcher is provided with a LAN port (RJ-45) as standard equipment. With a LAN cable connected, you can utilize the LAN environment. In addition, when the switcher is connected with a PC using a LAN cross cable, you can use a mode for setting and adjustment of the switcher (standalone mode). Contact your dealer/distributor about use of the switcher in standalone mode. [Example of Connection with LAN] Touch panel controller (option) Server NC series projector Hub LAN cable* (not supplied) PC LAN PC MM2000 * When the switcher and PC are connected, use the LAN cross cable. 14
![](/manual_guide/products/nec-mm2000b-mm2000b-mm2000b-user-manual-e03bf9f/22.png)
14
2. Installation
2-5. Connecting to a Network
Connect various control terminals as required.
The switcher is provided with a LAN port (RJ-45) as standard equipment.
With a LAN cable connected, you can utilize the LAN
environment.
In addition, when the switcher is connected with a PC using a LAN cross cable, you can use a mode for setting and adjustment
of the switcher (standalone mode).
Contact your dealer/distributor about use of the switcher in standalone mode.
[Example of Connection with LAN]
Server
PC
PC
LAN cable* (not supplied)
NC series projector
Touch panel controller
(option)
MM2000
Hub
LAN
* When the switcher and PC are connected, use the LAN cross cable.