NEC MM2000B MM2000B : MM2000B User Manual - Page 19
Connecting Your Projector
View all NEC MM2000B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2. Installation 2-2. Connecting Your Projector Connect this unit and the projector as shown below. Connect the DVI-D A input terminal (DVI-A) on the projector and the DVI OUT-A terminal on this unit, as well as the DVI-D B input terminal (DVI-B) on the projector and the DVI OUT-B terminal on this unit using two commercially available DVI-D signal cables. Alternatively, when a mode to control this unit from the projector (linked mode) is used, connect this unit with the projector using a LAN cable. DVI OUT-B LAN DVI OUT-A LAN cross cable (not supplied) MM2000 DVI-D signal cable (not supplied) NC series projector DVI-A DVI-B LAN Touch panel controller (option) 11
11
2. Installation
2-2. Connecting Your Projector
Connect this unit and the projector as shown below.
Connect the DVI-D A input terminal (DVI-A) on the projector and the DVI
OUT-A terminal on this unit, as well as the DVI-D B input terminal (DVI-B) on the projector and the DVI OUT-B terminal on this
unit using two commercially available DVI-D signal cables.
Alternatively, when a mode to control this unit from the projector (linked mode) is used, connect this unit with the projector using
a LAN cable.
DVI-D signal cable
(not supplied)
LAN cross cable
(not supplied)
MM2000
Touch panel controller (option)
NC series projector
DVI OUT-A
DVI OUT-B
LAN
LAN
DVI-B
DVI-A