NEC MT1035 User Manual - Page 8

1 INTRODUCTION This section introduces you to your new MultiSync MT1035 (XGA) LCD Projector, provides a list of materials that comes with your projector and describes the features and controls. Congratulations On Your Purchase Of The MultiSync MT1035 LCD Projector The MultiSync MT1035 is one of the very best LCD projectors available today. The multiple LCD panels enable you to project precise images up to 320 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, DVD player, document camera, or even a laser disc player. You can use the projector on a tabletop or cart, you can permanently mount it on a ceiling*1, or you can use MultiSync MT1035 LCD Projector to project images from behind the screen. The remote control can be used wirelessly or with a cable, and you can even use the remote control with the built-in remote mouse receiver to operate the mouse on your PC or Mac. But best of all, the MultiSync MT1035 is an NEC LCD projector. That means you can depend on years of reliable performance and crystal-clear presentations! 13 Features you'll enjoy: • Simple set up and operation. • Hot air blown from the vents does not bother the audience during your presentation since the vents are located on the front. • A high-performance 150 watt short arc high pressure lamp that delivers 1200 ANSI lumens and is guaranteed for 2000 hours of service or six months, whichever comes first. • A wireless remote control that operates the projector from any angle. • A laser pointer that' s built into the remote control. • The power zoom control enables you to adjust the image to be between 25 and 320 inches (measured diagonally). • Keystone correction allows you to correct trapezoidal distortion so that the image is square. • White balance control allows you to adjust the brightness and contrast for each RGB color. • You can choose between video modes depending on your source: "normal" for a typical picture, "natural" for true color reproduction, and "camera" for use with a document camera or low APL picture. • The optional MT Viewer kit allows you to start your presentation even when a PC is not available at the site. • The "image capture" enables you to use the entire picture as a background image or to create slides (optional MT Viewer required). • An image can be projected from in front or behind a screen, and the projector can even be installed on the ceiling. • NEC Technologies' exclusive AccuBlend™ intelligent pixel blending technology - an extremely accurate image compression technology - offers a crisp image with SXGA (1280‫ן‬1024) resolution*2. You can select any point on the screen with the pointer and enlarge the selected area. • Supports most IBM VGA, SVGA, XGA, SXGA(with AccuBlend)*2, Macintosh, or any other RGB signals within a horizontal frequency range of 15.754 to 85 kHz and a vertical frequency range of 50 to 85 Hz. This includes NTSC, PAL, SECAM and NTSC4.43 standard video signals. Note: Composite video standards are as follows: NTSC: U.S. TV standard for video in U.S. and Canada. PAL: TV standard used in western Europe. SECAM: TV standard used in France and Eastern Europe. NTSC4.43: TV standard used in Middle East countries. PAL_N: TV standard used in Argentine, Paraguay and Uruguay. PAL_M: TV standard used in Brazil. 8 INTRODUCTION • The remote control can be used with or without a cable, and you can even use the remote to operate your PC or Macintosh mouse wirelessly from across the room with the built-in remote mouse receiver. • You can control your MultiSync MT1035 LCD Projector with a PC. • The contemporary cabinet design is compact, easy to carry, and complements any office, board room or auditorium. • Eight kinds of pointers are available for your presentation. *1 Installing the MultiSync MT1035 LCD Projector on the ceiling must be done by authorized NEC technicians. C o n s u l t y o u r NEC dealer for more information. *2 An SXGA image (1280‫ן‬1024) is converted into a 1024‫ן‬768 crisp image with NEC technology's AccuBlend. 14