NEC NP-M300X NP115 : ceiling plate instruction
NEC NP-M300X Manual
 |
UPC - 805736035629
View all NEC NP-M300X manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC NP-M300X manual content summary:
- NEC NP-M300X | NP115 : ceiling plate instruction - Page 1
Ceiling Plate SCP 100 for Projector Mounts Before you start... Please read entire instruction Ceiling Plate is intended for use only to support Projector Mounts or other products as specified by Peerless. A F I J K L H D M Lightweight Adjustable Suspended Ceiling Plate for Projector Mounts - NEC NP-M300X | NP115 : ceiling plate instruction - Page 2
Tray (A) is designed to fit above a 24" (610 mm) x 24" (610 mm) section of a conventional suspended ceiling system. It may also be mounted above 24" x 48" conventional suspended ceiling. Ceiling runners (see DETAIL 2, page 3) should have a "T" cross section and a minimum height of 1.5" (38 mm). For - NEC NP-M300X | NP115 : ceiling plate instruction - Page 3
the installer to verify that the ceiling to which the suspended ceiling kit is anchored will safely support the combined load of all attached components (Projector Mount, Extension Column, etc.) and ISSUED: 12-16-04 SHEET #: 120-9015-1 For customer service call 1-800-729-0307 or 708-865-8870.
-
1 -
2 -
3
 |
 |
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
ISSUED: 12-16-04
SHEET #: 120-9015-1
1
of
3
D
QTY.
DESCRIPTION
ceiling tray
1/4"-20 x 3/8" screws (not shown)
1/4"-20 nuts (not shown)
allen wrench
turnbuckle
20' (6.1m) tie wire (not shown)
eye bolt
concrete anchor
flush mount tube
M5 x 10 mm penta pin screw
M5 x 1" penta pin driver
escutcheon ring
1
4
4
1
4
1
5
5
1
1
1
1
A
B
C
D
F
G
H
I
J
K
L
M
I
H
F
Before you start...
Please
read entire instruction sheet
and
check the parts list
to insure that all parts and fasteners
have been included.
Recommended tools:
Phillips screwdriver, hammer and wire cutters, drill and drill bits.
Installation and Assembly: Lightweight Adjustable
Suspended Ceiling Plate
for Projector Mounts
Model:
SCP 100
This Adjustable Suspended Ceiling Plate is intended for use only to
support Projector Mounts or other products as specified by Peerless.
PART #
055-0492
520-2015
530-9302
560-9706
560-9620
600-2008
580-0006
580-0005
1446-014
505-9010
520-9249
1418-001A
J
A
M
K
L
Note: You may not need all hardware provided.
(27 kg)
Lightweight Adjustable Suspended Ceiling Plate for Projector
Mounts - Specifications
60 lb
60 lb
Concrete
Wood
Max. Load Capacity
Model
Number
SCP 100
(27 kg)
•
Weight of projector and mount not to exceed maximum load
capacity.
WARNING