NEC NP-M300X NP115 : ceiling plate instruction - Page 1

Installation and Assembly: Lightweight Adjustable Model: Suspended Ceiling Plate SCP 100 for Projector Mounts Before you start... Please read entire instruction sheet and check the parts list to insure that all parts and fasteners have been included. Recommended tools: Phillips screwdriver, hammer and wire cutters, drill and drill bits. QTY. A1 B4 C4 D1 F4 G1 H5 I5 J1 K1 L1 M1 DESCRIPTION ceiling tray 1/4"-20 x 3/8" screws (not shown) 1/4"-20 nuts (not shown) allen wrench turnbuckle 20' (6.1m) tie wire (not shown) eye bolt concrete anchor flush mount tube M5 x 10 mm penta pin screw M5 x 1" penta pin driver escutcheon ring PART # 055-0492 520-2015 530-9302 560-9706 560-9620 600-2008 580-0006 580-0005 1446-014 505-9010 520-9249 1418-001A Note: You may not need all hardware provided. This Adjustable Suspended Ceiling Plate is intended for use only to support Projector Mounts or other products as specified by Peerless. A F I J K L H D M Lightweight Adjustable Suspended Ceiling Plate for Projector Mounts - Specifications Model Number Max. Load Capacity Concrete Wood SCP 100 60 lb (27 kg) 60 lb (27 kg) WARNING • Weight of projector and mount not to exceed maximum load capacity. Visit the Peerless Web Site at www.peerlessindustries.com 1 of 3 ISSUED: 12-16-04 SHEET #: 120-9015-1 For customer service call 1-800-729-0307 or 708-865-8870.