NEC PX-50XM3A 42VP4/42XM2/50XM3/61XM2 - Page 36
Setting the time, SCREEN WIPER
View all NEC PX-50XM3A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Setting the time for INVERSE/WHITE Set a time duration. Example: Setting to that the INVERSE mode starts in 2 hours and proceeds for one hour and a half. Perform Steps 1-3 of INVERSE, then... 4. Use the ᮤ and ᮣ buttons to select "ON", then press the MENU/ENTER button. THE "INVERSE/WHITE" screen appears. 5. Adjust the time using the vwᮤ and ᮣ buttons. The mode switches as follows each time the ᮤ or ᮣ button is pressed: • WORKING TIME →ON ↔ 00H03M ↔ 00H06M 12H42M ↔ 12H45M← • WAITING TIME →00H03M ↔ 00H06M ↔ 00H09M 12H42M ↔ 12H45M← INVERSE/WHITE WORKING TIME : 01H30M WAITING TIME : 02H00M SEL. ADJ. EXIT RETURN Information Ⅵ Setting the time WORKING TIME ..... Set the time duration for "INVERSE/WHITE". When the WORKING TIME is set to "ON" the mode will stay on. WAITING TIME ...... Set the standby time until the "INVERSE/WHITE" mode starts. * The "WAITING TIME" can not be set when the "WORKING TIME" is ON. * THE "WORKING TIME" and "WAITING TIME" can be set for up to 12 hours and 45 minutes in units of 3 minutes. * Ending a WORKING TIME function, the monitor will be STAND BY. [Example] WORKING TIME: 01H30M WAITING TIME: 02H00M 2 H 1.5 H Start INVERSE/WHITE Start STAND BY Ⅵ To select "ON" for the "WORKING TIME"... Set the hours of the working time to 0H and the minutes to 0M. "ON" will be displayed. SCREEN WIPER When this is set to ON, a white vertical bar moves repeatedly from the left and of the screen to the right end at a constant speed. Example: Setting "SCREEN WIPER" to "ON" Perform Steps 1-2 of LONG LIFE, then... 3. Use the v and w buttons to select "SCREEN WIPER". 4. Use the ᮤ and ᮣ buttons to select "ON". The mode switches as follows each time the ᮤ or ᮣ button is pressed: OFF ↔ ON LONG LIFE PLE : ORBITER : INVERSE : SCREEN WIPER : SOFT FOCUS : AUTO OFF OFF ON OFF SEL. ADJ. EXIT RETURN Information Ⅵ SCREEN WIPER ON ......... The white vertical bar appears. You can set the time by pressing the MENU/ ENTER button while "ON" is set. OFF ....... Screen wiper mode does not function. Setting the time for SCREEN WIPER Set a time duration and the speed. Example: Setting to that the SCREEN WIPER mode starts in 30 minutes and proceeds for one hour and a half. Perform Steps 1-3 of SCREEN WIPER, then... 4. Use the ᮤ and ᮣ buttons to select "ON", then press the MENU/ENTER button. THE "SCREEN WIPER" screen appears. 5. Adjust the time and speed using the vwᮤ and ᮣ buttons. The mode switches as follows each time the ᮤ or ᮣ button is pressed: • WORKING TIME →ON ↔ 00H03M ↔ 00H06M 12H42M ↔ 12H45M← • WAITING TIME →00H03M ↔ 00H06M ↔ 00H09M 12H42M ↔ 12H45M← • SPEED →1 ↔ 2 ↔ 3 ↔ 4 ↔ 5← SCREEN WIPER WORKING TIME : 01H30M WAITING TIME : 00H30M SPEED : 3 SEL. ADJ. EXIT RETURN 29