NEC PX42XM4A 42XM4 speaker UM - Page 4

Mounting the plasma monitor using mount fittings A The speakers are marked R for use on the right side and L for use on the left side. At the time of mounting, check for the letter R or L appearing on the label at the back of the speaker, and on the mounting fittings. 1 Attach the cushions to the sides of the speakers in the positions indicated on the diagram. 2 Mount the two right mount fittings ("R") to the speaker labeled "R", the two left mount fittings ("L") to the speaker labeled "L". Mount by inserting the guide pins on the speaker into the holes in the mount fitting then fastening the fitting in place using the included M4 x 10 screws (two each). L .ʷ Cushions R GΨuiΠdeυpϐinϯs
R R L L 3 Partially tighten the included M4 X 14 screws in the screw holes on the top of the monitor. 4 Catch the hooks at the top of the speaker on the partially tightened screws, then line up the screw hole in the bottom of the monitor with the hole in the speaker's hook and partially tighten using the included M4 x 14 screws (two each). .ʷ 4