NEC PX42XM4A 42XM4 speaker UM - Page 6
Mounting the plasma monitor using mount fittings B
UPC - 050927250873
View all NEC PX42XM4A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Mounting the plasma monitor using mount fittings B The speakers are marked R for use on the right side and L for use on the left side. At the time of mounting, check for the letter R or L appearing on the label at the back of the speaker, and on the mounting fittings. 1 Attach the cushions to the sides of the speakers in the positions indicated on the diagram. 2 Check the speakers' labels ("L" and "R"), and place them as shown on the diagram below. Mount the 42R UP mount fitting to the top of speaker R, the 42R BOTTOM mount fitting to the bottom of speaker R, the 42L UP mount fitting to the top of speaker L, the 42L BOTTOM mount fitting to the bottom of speaker L. Mount by inserting the guide pins on the speakers into the holes in the mount fittings then fastening using the included M4 x 10 screws (two each). Cushions L .ʷ R GΨuiΠdeυpϐinϯs R R L L 3 Partially tighten the included M8 X 18 screws in the screw holes on the top of the monitor. 4 Catch the hooks at the top of the speaker on the partially tightened screws, then line up the screw hole in the bottom of the monitor with the hole in the speaker's hook and partially tighten using the included M4 x 18 screws (two each). .ʷ 6