NEC PX42XM4A 42XM4 speaker UM - Page 7
Turn off the power of all connected units before connecting the cords.
UPC - 050927250873
View all NEC PX42XM4A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5 Fully tighten the four partially tightened screws. *Push the speaker against the monitor while driving the screw. WARNING ˔Do not move the monitor by holding onto the speakers which have been mounted to the monitor. This could cause the monitor to fall and result in injury. ˔Fasten the screws securely. Failing to do so could cause the speakers to fall and result in injury. Connecting the cords Turn off the power of all connected units before connecting the cords. Connect the monitor's SPEAKER R and L terminals with the speakers' terminals using the included connection cords. There is polarity ʴʵ with the conductor of each connection cord. Connect each conductor to the correct terminal. Black 3*()5 -&'5 Red Hold down the button of the connection terminal with your finger, insert the conductor of the connection cable, and release your finger. Cord Clamper Peel off the protective tape from the back of the clamper, then mount the clamper in the desired position and clamp the cords together. 7