NaceCare TGB2228 COMING SOON Owners Instructions - Page 9

Raising/Lowering the Floor Tool After preparing the floor (see previous section), we are now ready to set the controls to suit the cleaning conditions. Before any settings can be applied, ensure the brush deck is lowered. Move the floor tool lever to its lower position. NOTE: Do not drive the machine backwards with the floor tool in the lowered position, this could possibly damage the blades. Machine Operation Raising/Lowering the Brush Deck The control for lowering the brush deck can be found to the rear right of the machine. Lower the brush deck by moving the left hand release lever to the upper position. Setting the Cleaning Controls Insert the key, turn the main control on / off key to position '1'. B (Fig.A) The traction status light will illuminate. Set desired traction speed as required, depending on floor type and level of soiling (Fig.B). Middle speed is the optimum cleaning speed. A Set the flow rate (Fig.C). The TGB 8572 is equipped with an electronic braking system. Simply release the hand operated start / stop trigger and the machine will stop. In an emergency, strike the Emergency Stop button. (Fig.D). The machine will be disabled. C To reset, turn Emergency Stop button clockwise. After re-setting the Emergency Stop button, to restart the D machine, turn the main control on / off key to '0' and then position '1'. T 01460 68600 9