Nady MGT-16 Owners Manual - Page 6
MT-16A/R Instrument Transmitter
View all Nady MGT-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Quick User Controls Guide MT-16A/R Instrument Transmitter MT-16R (Straight plug) 18 17 15dB PAD POW ER 24 25 POW ER 15dB PAD 19 MT-16A (Angled plug) 20 21 22 23 26 17. POWER SWITCH To power transmitter Off/On 18. 15dB ATTENUATION PAD Select to reduce the input gain by 15dB for higher level audio input signals 19. INPUT ¼" PLUG Connect directly into guitar/bass output jack 20. LOW BATTERY LED Indicates battery needs replacement 21. IR RECEPTOR SENSOR/WINDOW Infrared LED sensor for linking the TX to the RX during IR frequency download 22. BATTERY COMPARTMENT Insert one AAA battery, observing correct polarity 6 23. INTERNAL AUDIO LEVEL ADJUST Remove battery to access slot and adjust internal trim-pot with small screwdriver for optimal input level setting. Note: this is to be done only in rare cases as factory level setting is already optimized for most guitars and basses and 15dB Pad also available. Note: Set control carefully. If trim-pot is turned past minimum and maximum adjustment points it may need to be backed up to achieve desired setting. 24. ANTENNA Permanently attached antenna 25. BATTERY Single AAA alkaline or NiMH battery required for operation 26. BATTERY COMPARTMENT COVER