Nady U-41 Manual - Page 8

UH-4 HANDHELD TRANSMITTER 19 18 20 17 16 UB-4 BODYPACK TRANSMITTER Transmitters set up The UB-4 transmitter requires a single 9V battery to operate. To open the battery compartment, snap open the battery door cover (21), exposing the battery holder (22). Insert a fresh 9V battery according to the correct polarity as indicated on the transmitter body. Snap the cover back onto the bodypack. Make sure the cover is secured completely. Fresh alkaline batteries can last up to 10 hour of operation, but in order to ensure optimum performance, it is recommended that the batteries should be replaced after 6-8 hours of use. Input Connection and Input Selector Switches The UB-4 is provided with a 3.5mm locking jack (23) for connecting the audio input selected. Connect either the Instrument cord (24), or the Headworn Mic (25), or Lavalier Mic (26) as desired, according to the input selected. (Note: Use only the input audio source as per the setting selected by the Input Selector Switch or the audio will not be optimal- a muddy or distorted sound may result.) To secure the connection, turn the slip ring on the plug clockwise ti thread it on the jack. To unplug, reverse the process. Slip the transmitter into a pocket or clip it onto you cloth or instrument strap (if using the UB-4 as an instrument transmitter.) 8