Naxa NHS-2007 NHS-2007 manual- English - Page 10
Power Source, Aux 1 Source
View all Naxa NHS-2007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
POWER SOURCE To turn the speaker on ·Use the suppplied AC/DC adapter to connect the POWER jack of the unit to a compatible power source; the indicator will turn red. ·Press the POWER button to turn the unit on. To turn the speaker off· Press the POWER button on the remote or hold the POWER button on the side of the unit. NOTE: Disconnect the power adapter if the unit will not be used for a long time. AUX 1 SOURCE AUX 1 sources may include: ·TV/DVD/VCR AUX 1 connection 1. Use an AV cable to connect the audio output jacks (white jack=L, red jack=R) of the source device (e.g., a TV) to the AUX 1 audio input jacks found on the rear of the unit. 2. Turn on the unit. Press the SOURCE button until the indicator turns green. Start playback on the source device. NOTE: If there is no sound or if the volume is not loud enough, try increasing the volume on the source device. Audio Out Jacks of TV/DVD/VCR/DVR To AUX 1Jacks of the Sound Bar R L AUX 1 During playback - Press the MUTE button to disable the sound. Press MUTE again to reenable the sound. - Press the VOLUME+/- buttons to adjust the volume level. - Press the BASS+/- buttons to adjust the bass level. - Press the TREBLE+/- buttons to adjust the treble level. - Press the EQ button to switch between POP, JAZZ, CLASSIC, and ROCK equalizer settings. 9