Naxa NHS-2007 NHS-2007 manual- English - Page 14

TROUBLE SHOOTING GUIDE Check the followings before requesting service SYMPTOM POSSIBLE CAUSE Power adapter not connected No power The unit is in Standby mode Volume in minimum position No sound Remote control not working AUX 1 / AUX 2 not working The connected device is not in payback mode Sound output of the device weak The batteries in the remote control are exhausted Wrong source is selected Wrong source is selected No response from Bluetooth source The unit is connected with another Bluetooth device The connected device is Deactivated POSSIBLE SOULTION Connect the adapter Press the Standby button on the unit or remote control to power on the unit. Raise volume level by pressing the VOL (Volume)+Button Play the music/movie in the connected device Raise volume level of the connected device Replace with new battery Press source button until indicator turns green(AUX 1 ) / orange (AUX 2) Press source button until indicator turns Blue Disconnect the connection and retry. Activate the connected device and start the playback SPECIFICATIONS Audio output ...10W Power source of the remote control DC 3V 1 x CR 2025 battery Power source of the power adapter AC 110-240V~50/60 Hz Output of the power adapter DC 12V, 1.2 A ACCESSORIES 1 x Instruction Manual 1 x Remote Control with CR 2025 button cell 1 x Stereo audio connection cable with 3.5mm stereo plug 1 x RCA line in cable 1 x Adapter 2 x Screws 2 x Wall plugs 13