Naxa NHS-2007 NHS-2007 manual- English - Page 11

AUX 2 SOURCE AUX 2 sources may include: - Personal audio players - Personal computers or laptops AUX 2 connection: 1. Use a stereo 3.5mm jack cable (supplied) to connect the headphone (or LINE/Audio) output of the source device (e.g., an iPod) to the AUX 2 audio input jack found on the side of the unit. 2. Turn on the unit. Press the SOURCE button until the indicator turns orange. Start playback on the source device. NOTE: If there is no sound or if the volume is not loud enough, try increasing the volume on the source device. To 3.5mm AUX 2 jack on the Sound Bar Connect to the 3.5mm Audio Out jack of external audio devices including Tablets, Laptops, Smartphones, MP3 Players, etc. 3.5mm Aux In Cable (Included) During playback - Press the MUTE button to disable the sound. Press MUTE again to reenable the sound. - Press the VOLUME+/- buttons to adjust the volume level. - Press the BASS+/- buttons to adjust the bass level. - Press the TREBLE+/- buttons to adjust the treble level. - Press the EQ button to switch between POP, JAZZ, CLASSIC, and ROCK equalizer settings. 10