Naxa NTD-7561A NTD-7561 English Manual - Page 27
Select, Wanted, Program, Volume, Control
View all Naxa NTD-7561A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
SELECT WANTED PROGRAM 1. Press CH + button to enter next channel. 2. Press CH - button to enter previous channel. 3. Press numeric buttons on the remote control directly to select wanted program. Example: Track 9, press "9", three seconds later it will turn to track 9 automatically, or press ENTER button to confirm directly; Track 12, press "1" and "2", three seconds later it will turn to track 12 automatically, or press ENTER button to confirm directly. NOTE: If one frequency dot has more than one channel, for example, track 15-3, press " 1 " and " 5 " , then press " 10+ " and " 3 " , three seconds later it will turn to track 15-3 automatically, or press ENTER button to confirm directly. VOLUME CONTROL 1. Press the VOL+ or VOL- to adjust the level of currently volume. 2.The level of VOLUME can be adjusted from 0-20. MUTE CONTROL Press the Mute button to mute the sound, press it again to switch ON the sound. NOTE: When the unit is in Mute mode, pressing VOL+ button will switch ON the sound and turn it up, pressing VOL- button will switch ON the sound and turn down the sound. CC It is used to set the caption mode. -Keep pressing CC button to select different mode as desired. -Option:On/Off INFO(INFORMATION) Press INFO button to display current program information. EPG (Electronic program guide) Press the EPG button to access the program guide supplied by the signal provider (not available in all areas). Press the LEFT/RIGHT button to access previous/next page in program scheduler. 26