Naxa NTD-7561A NTD-7561 English Manual - Page 9
Basic, Connection
![]() |
View all Naxa NTD-7561A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
BASIC CONNECTION • Ensure all the cables are disconnected from the main unit before connecting to AC power source. • Read through the instructions before connecting other equipment. Connecting to AC power source Main unit 00 To power outlet NOTE: Before connecting to AC power, push the POWER ON/OFF switch to OFF. AC adaptor Rechargeable Battery Use The player built-in a chargeable Lithium battery. 1.Charge the battery -Connect the adaptor to the DC 12V IN jack, then set the unit in POWER ON mode (THE PLAYING MODE)for fully charge. -Set in POWER ON mode and press the STANDBY button (THE STANDBY MODE) or set in POWER OFF mode for fully charge. And the indicator is red during charging; it gets green when charging is completed. 2.Time to recharge the battery Charge the built-in battery pack 8 hours before using the player for the first time. Recharge and playback time depends on battery pack capacity and the temperature condition. Generally speaking, the battery needs to be charged about 2 hours. 3.Using and Maintaining Rechargeable Battery -.The normal working condition temperature is: 0 -45°C ; -.Always unplug AC/DC power supply for the unit whenever not playing. NOTE: A new battery pack which has not been used or one which has not been used for more than a month, may appear to not recharged enough , this is due to the characteristic of this battery and is not a malfunction. In this case, recharge it two or three times before the first use, and it needs more than 8 hours to recharge battery. Noises may be generated during recharging. In this case, use a more distant power socket. Do not recharge or discharge battery near a heating element such as a heater or direct sunlight. 8
![](/manual_guide/products/naxa-ntd7561a-ntd7561-english-manual-a3393db/9.png)