Netgear 771S AT Command Reference - Page 40
Table 7-3, Supported 27.007 AT commands, Table 7-2, Supported 27.005 AT commands Continued
View all Netgear 771S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
AirCard 77Xs / 34xU AT Command Reference Table 7-2: Supported 27.005 AT commands (Continued) Command Description +CMS ERROR: SMS error (mobile or network error) +CMSS Send message from storage +CMT Incoming message directly displayed +CMTI Incoming message stored in ("SM" - (U)SIM message storage) at location +CNMA New message acknowledgement to mobile equipment +CNMI New message indications to TE +CPMS Preferred message storage +CRES Restore settings +CSAS Save settings +CSCA Service center address +CSCB Select cell broadcast message types +CSDH Show text mode parameters +CSMP Set text mode parameters +CSMS Select message service Supported =Yes; =No Table 7-3: Supported 27.007 AT commands Command Description C +CACM +CACSP +CAEMLPP +CAHLD +CAJOIN +CALA +CALCC ITU T V.24 circuit 109 carrier detect signal behavior command Format • C Limitations • Default = 2 • = 2 causes the AT/Data carrier detect pin to 'wink' (briefly switch off and on) when data calls end. • = 0 or 1 performs as defined in the standard Accumulated call meter Voice Group or Voice Broadcast Call State Attribute Presentation eMLPP Priority Registration and Interrogation Leave an ongoing Voice Group or Voice Broadcast Call Accept an incoming Voice Group or Voice Broadcast Call Alarm List current Voice Group and Voice Broadcast Calls Supported =Yes; =No Partial N/A N/A N/A N/A N/A 40 Proprietary and Confidential 4114487