Netgear CM400 User Manual - Page 19

Use the Factory Reset Software Button, Factory Reset

Get Netgear CM400 PDF manuals and user guides View all Netgear CM400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

CM400 High Speed Cable Modem 3. Release the Reset button. The configuration is reset to factory default settings. When the reset is complete, the cable modem reboots. This process takes about one minute. WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset. For example, if you are connected to the web management interface, do not close the browser, click a link, or load a new page. Do not turn off the cable modem. Use the Factory Reset Software Button CAUTION: This process erases all settings that you configured in the cable modem.  To erase the settings: 1. Launch a web browser from a computer that is attached over an Ethernet cable to the cable modem or from a computer that is connected to a WiFi router that is attached over an Ethernet cable to the cable modem. 2. Type http://192.168.100.1. A login screen displays. 3. Enter the cable modem user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED. The Cable Information pane displays. 5. In the Cable Information pane, click the Factory Reset button. A confirmation message displays. Manage and Monitor 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
Manage and Monitor
19
CM400 High Speed Cable Modem
3.
Release the
Reset
button.
The configuration is reset to factory default settings. When the reset is complete, the
cable modem reboots. This process takes about one minute.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the
reset. For example, if you are connected to the web management
interface, do not close the browser, click a link, or load a new page.
Do not turn off the cable modem.
Use the Factory Reset Software Button
CAUTION:
This process erases all settings that you configured in the cable modem.
To erase the settings:
1.
Launch a web browser from a computer that is attached over an Ethernet cable to the
cable modem or from a computer that is connected to a WiFi router that is attached over an
Ethernet cable to the cable modem.
2.
Type
.
A login screen displays.
3.
Enter the cable modem user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED
.
The Cable Information pane displays.
5.
In the Cable Information pane, click the
Factory Reset
button.
A confirmation message displays.