Netgear FA510 FA510 Installation Guide - Page 2

Start Here Instructions in this guide are for users of Windows® who are installing the Model FA510 Network Card. For instructions on installing and verifying the Windows network driver, refer to "Install the Windows Network Driver" on the other side of this guide. These four easy steps provide information for installing your Model FA510 Network Card: 1. Verify Package Contents 2. Install the Network Card 3. Connect the Network Cables 4. Install the Network Driver As a last step, be sure to fill out and send in your warranty card. To register online, direct your Web browser to the Web page at: http://www.netgear.com Verify Package Contents Unpack the contents of the package and make sure that you have everything. Drivers and Diagnostics Disk Model FA510 Network Card RJ-45 adapter cable Category 5 10/100 Mbps UTP cable (provided with Model FA510C Network Card) Installation guide, Warranty & Owner Registration Card, and Support Information Card 9034FA Verify PC Requirements The instructions given in this guide are for using the NETGEAR™ Model FA510 Network Card in a PC that has a Microsoft® Windows operating system. Model FA510 Network Card Installation Guide