Netgear FS104 Installation Guide - Page 14

RJ-45 Connector The RJ-45 connector (shown in the illustration with an RJ-45 plug) is used to connect workstations and switches through unshielded twisted pair cable. The RJ-45 connector accepts four-pair Category 3 or Category 5 UTP cable. Only two pairs are used for 10BASE-T wiring. 12345678 81 711EA RJ-45 Connector Pin Assignment Normal Assignment: 1 2 3 6 4, 5, 7, 8 Input Receive Data + Input Receive Data Output Transmit Data + Output Transmit Data Not used Uplink Assignment: Port 1 or 2 on the Model FS102 Switch Port 4 on the Model FS104 Switch Port 8 on the Model FS108 Switch Output Transmit Data + Output Transmit Data Input Receive Data + Input Receive Data Not used Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide