Netgear FS104 Installation Guide - Page 5

LEDs This table describes the activity of the Model FS102/FS104/FS108 switch LEDs. Label Color Activity Description Pwr (Power) Rx/Tx/Collision 100 Mbps Green On Off Green Blinking Yellow Blinking Green On Off Power is supplied to the switch. Power is disconnected. Packet transmission or reception is occurring on the port. Data collisions are occurring on the port. The blinking action corresponds to the number of collisions. When a collision occurs, the connected device pauses and transmits again after waiting a specified time. Note that occasional collisions are normal. The port is operating at 100 Mbps. The port is operating at 10 Mbps. Link Green On (located at the top left corner Off of each vista 10BASE-T port) A valid link is established on the port. A link is not established on the port. FDX Green On (located at the top right corner Off of each vista 10BASE-T port) The port is operating in full-duplex mode. The port is operating in half-duplex mode. Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide