Netgear FS728TP FS728TP Hardware manual - Page 22
LED Designations, Port LEDs - 24 port poe switch
UPC - 606449050226
View all Netgear FS728TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
FS728TP Hardware Installation Guide Figure 3-2 illustrates the NETGEAR FS728TP Smart Switch back panel: Figure 3-2 The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord. LED Designations This section provides an explanation for the following LED types: • Port LEDs • System LEDs Port LEDs The following table describes the port LED designations. Table 3-1. Port LEDs Port 1-24 Port mode select LED LED 24-10/100M Ports - One Link/ACT/SPD LED LED/Port (Ethernet (Light Pipe) Mode) Designation • Solid Green - Device is in Ethernet Mode (default). • Solid Yellow - Device is in PoE Mode. • Off - No 10/100Mbps link is established on the port. • Solid Green - A valid 100Mbps link is established on the port. • Flashing Green - Packet transmission or reception is occurring on the port at 100Mbps. • Solid Yellow - A valid 10Mbps link is established on the port. • Flashing Yellow - Packet transmission or reception is occurring on the port at 10Mbps. Physical Description v1.0, November 2007 3-20