Netgear FSM726 FSM726v2 Setup Manual - Page 134
Patch Panels and Cables, B-2, Crossover Twisted-Pair Cable
UPC - 606449026856
View all Netgear FSM726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
700 Series Software Manual v2.1 Figure B-2 illustrates crossover twisted pair cable. Figure B-2: Crossover Twisted-Pair Cable Patch Panels and Cables If you are using patch panels, make sure that they meet the 100BASE-TX requirements. Use Category 5 UTP cable for all patch cables and work area cables to ensure that your UTP patch cable rating meets or exceeds the distribution cable rating. To wire patch panels, you need two Category 5 UTP cables with an RJ-45 plug at each end, as shown here. Figure B-3: Category 5 UTP Cable with Male RJ-45 Plug at Each End B-4 Cabling Guidelines
700 Series Software Manual v2.1
B-4
Cabling Guidelines
Figure B-2
illustrates crossover twisted pair cable.
Figure B-2:
Crossover Twisted-Pair Cable
Patch Panels and Cables
If you are using patch panels, make sure that they meet the 100BASE-TX requirements. Use
Category 5 UTP cable for all patch cables and work area cables to ensure that your UTP patch
cable rating meets or exceeds the distribution cable rating.
To wire patch panels, you need two Category 5 UTP cables with an RJ-45 plug at each end, as
shown here.
Figure B-3:
Category 5 UTP Cable with Male RJ-45 Plug at Each End