Netgear FVG318NA FVG318 Reference Manual - Page 149
Problems with Date and Time, Reset, Adjust for Daylight Savings
View all Netgear FVG318NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual • Use the Reset button on the rear panel of the firewall. Use this method for cases when the administration password or IP address are not known. a. Press and hold the Reset button until the Test LED turns on and begins blinking (about 10 seconds). b. Release the Reset button and wait for the firewall to reboot. Problems with Date and Time The E-Mail menu in the Content Filtering section displays the current date and time of day. The VPN firewall uses the Network Time Protocol (NTP) to obtain the current time from one of several Network Time Servers on the Internet. Each entry in the log is stamped with the date and time of day. Problems with the date and time function can include: • Date shown is January 1, 2000. Cause: The firewall has not yet successfully reached a Network Time Server. Check that your Internet access settings are configured correctly. If you have just completed configuring the firewall, wait at least five minutes and check the date and time again. • Time is off by one hour. Cause: The firewall does not automatically sense Daylight Savings Time. In the E-Mail menu, check or uncheck the box marked Adjust for Daylight Savings Time. Troubleshooting 9-7 v1.0, September 2007