Netgear FVG318NA FVG318 Reference Manual - Page 167
Viewing and Editing the VPN Parameters
View all Netgear FVG318NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual • Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel endpoints • Remote WAN IP address: 22.23.24.25 (in this example), must be unique at each VPN tunnel endpoint • Remote LAN IP Subnet - IP Address: 172.23.9.1 (in this example), must be unique at each VPN tunnel endpoint - Subnet Mask: 255.255.255.0 (in this example) 3. Log in to the FVL328 labeled Gateway B. Log in at the default address of http://192.168.0.1 with the default user name of admin and default password of password (or using whatever password and LAN address you have chosen). Note: Based on the network addresses used in this example, you would log in to the LAN IP address of http://172.23.9.1 at Gateway B. 4. Repeat the process using the VPN Wizard to configure the FVL328 at Gateway B. • Connection Name: Scenario_1 (in this example) • Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel endpoints • Remote WAN IP address: 14.15.16.17 (in this example), must be unique at each VPN tunnel endpoint • Remote LAN IP Subnet - IP Address: 10.5.6.1 (in this example), must be unique at each VPN tunnel endpoint - Subnet Mask: 255.255.255.0 (in this example) All traffic from the range of LAN IP addresses specified on FVG318 A and FVL328 B will now flow over a secure VPN tunnel once the VPN tunnel is initiated (see "Initiating and Checking the VPN Connections" on page C-12). Viewing and Editing the VPN Parameters The VPN Wizard sets up a VPN tunnel using the default parameters from the VPN Consortium (VPNC). • The Pre-Shared Key must be the same at both VPN tunnel endpoints. VPN Configuration of NETGEAR FVG318 v1.0, September 2007 C-11