Netgear GS110T GS110T Hardware Installation Guide - Page 8

NETGEAR GS110T Smart Switch Ethernet, or Gigabit Ethernet devices. In addition, all RJ-45 ports operate in half-duplex or full-duplex mode. The maximum segment length is 328 feet (100 meters) over Category 5 Unshielded Twisted-Pair (UTP) cable. Features The following list identifies the key features of the GS110T Smart Switch: • Eight RJ-45 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports. • Two 1000M SFP Gigabit Ethernet switching ports. • Full NETGEAR Smart Switch functionality. • Full compatibility with IEEE standards: • IEEE 802.3 CSMA/CD • IEEE 802.3i (10BASE-T) • IEEE 802.3u (100BASE-TX) • IEEE 802.3x (Full-duplex flow control) • IEEE 802.3ab (1000BASE-T) • IEEE 802.3z (1000BASE-x) • Autosensing and auto-negotiating capabilities for all ports. • Auto Uplink™ on all ports to make the right connection. • Automatic address learning function to build the packet-forwarding information table. The table contains up to 4K Media Access Control (MAC) addresses. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss and frame drops. • Half-duplex backpressure control. • Per port LEDs, power LED. • Standard NTGR 1xx series chassis. • External 12V/1A Power Adapter. Introduction 8