Netgear GS510TPP User Manual - Page 425

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Maintenance > Troubleshooting > Remote Diagnostics. The Remote Diagnostics page displays. 6. Select the Enable radio button. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Memory Dump Settings and Perform a Full Memory Dump Note: Model GS418TPP supports a full memory dump. Models GS510TLP and GS510TPP do not. You can perform a full memory dump to retrieve the core dump for the purpose of troubleshooting.  To configure the memory dump settings, test a memory dump to a USB device, and perform a full memory dump: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Maintenance > Troubleshooting > Full Memory Dump. Maintenance 425