Netgear GS510TPP User Manual - Page 89
Con LLDP Global Settings, System > LLDP > Basic > LLDP Configuration
View all Netgear GS510TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Configure LLDP Global Settings You can specify the global LLDP and LLDP-MED parameters that are applied to the switch. To configure global LLDP settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > LLDP > Basic > LLDP Configuration. 6. To configure nondefault values for the following LLDP properties, specify the following options: • TLV Advertised Interval. The number of seconds between transmissions of LLDP advertisements. • Hold Multiplier. The transmit interval multiplier value, where transmit hold multiplier × transmit interval = the time to live (TTL) value that the device advertises to neighbors. • Re-initializing Delay. The number of seconds to wait before attempting to re-initialize LLDP on a port after the LLDP operating mode on the port changes. • Transmit Delay. The minimum number of seconds to wait between transmissions of remote data change notifications to one or more SNMP trap receivers configured on the switch. 7. To configure a nondefault value for LLDP-MED, enter a value in the Fast Start Duration field. Configure System Information 89