Netgear GS724TR GS748TR Hardware manual - Page 11

Package Contents, Per port LEDs, System LEDs.

Page 11 highlights

GS700TR Series Hardware Installation Guide • Auto Uplink™ on all ports to make the right connection. • Automatic address learning function to build the packet-forwarding information table. The table contains up to 4K Media Access Control (MAC) addresses. • Full- and Half-duplex functions for all 10/100/1000 Mbps ports. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss/frame drops. • Half-duplex back-pressure control. • Per port LEDs, System LEDs. • Standard 1U high, rack mountable 17" chassis. • Fan speed control supported. Package Contents Figure 1-1 shows the package contents of the NETGEAR GS700TR Series Smart Switch. Figure 1-1 Verify that the package contains the following: • NETGEAR Smart Switch Introduction 1-3 v1.0, December 2007

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

GS700TR Series Hardware Installation Guide
Introduction
1-3
v1.0, December 2007
Auto Uplink™ on all ports to make the right connection.
Automatic address learning function to build the packet-forwarding information table. The
table contains up to 4K Media Access Control (MAC) addresses.
Full- and Half-duplex functions for all 10/100/1000 Mbps ports.
Store-and-Forward transmission to remove bad packets from the network.
Full-duplex IEEE 802.3x pause frame flow control.
Active flow control to minimize packet loss/frame drops.
Half-duplex back-pressure control.
Per port LEDs, System LEDs.
Standard 1U high, rack mountable 17” chassis.
Fan speed control supported.
Package Contents
Figure 1-1
shows the package contents of the NETGEAR GS700TR Series Smart Switch.
Verify that the package contains the following:
NETGEAR Smart Switch
Figure 1-1