Netgear GS724TR GS748TR Hardware manual - Page 15

GS700TR Series Hardware Installation Guide • System LEDs Figure 2-4 illustrates the NETGEAR GS748TR Smart Switch back panel: RS-232 Power Connector Figure 2-4 The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord. LED Designations Port LEDs The following table describes the port LED designations. Table 2-1. Port LEDs Port LED 24/48-10/100/1000 Ports - SPD/Link/ACT LED One LED/Port Designation • Solid Green - A valid 1000Mbps link is established on the port. • Flashing Green - Packet transmission or reception is occurring on the port at 1000Mbps. • Solid Yellow - A valid 10/100Mbps link is established on the port. • Flashing Yellow - Packet transmission or reception is occurring on the port at 10/ 100Mbps. • Off - No 10/100Mbps link is established on the port. Physical Description 2-7 v1.0, December 2007