Netgear M5300-28G3 Software Administration Manual - Page 282

ProSafe Managed Switch a. Select Security > Management Security > Radius > Server Configuration. A screen similar to the following displays. b. In the Radius Server IP Address field, enter 192.168.0.1. c. In the Secret Configured field, select Yes. d. In the Secret field, enter 12345. e. Click Add. 7. Configure the guest VLAN. a. Select Security > Port Authentication > Advanced > Port Authentication. A screen similar to the following displays. b. Scroll down and select the port 1/0/1 and 1/0/24 check boxes. c. In the Guest VLAN ID field, enter 2000. d. Click Apply to save your settings. Assign VLANs Using RADIUS This feature allows the client to connect from any port and be assigned to the appropriate VLAN assigned by the RADIUS server. This gives flexibility for the clients to move around the network without requiring the administrator to do static VLAN configuration. When multiple hosts are connected to the switch on the same port, only one host uses authentication. If any VLAN information is applied on the port based on the authenticated host, the VLAN applies that information to all the hosts that are connected to that port. 282 | Chapter 15. Security Management