Netgear MBR1515 User Manual - Page 8
Table 1., LED descriptions, Hardware Setup, LTE Broadband 11n Wireless Router MBR1515 - 4g lte
![]() |
View all Netgear MBR1515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
LTE Broadband 11n Wireless Router MBR1515 Table 1 describes each LED and button on the front panel of the router. Table 1. LED descriptions LED WPS Activity Description Press the WPS button to open a 2-minute window for the router to connect with other WPS-enabled devices. For more information about this function, see Wi-Fi Protected Setup (WPS) Method on page 17. Wireless On/Off This button can be used to control the WiFi radio or both the WiFi radio and mobile broadband radio. Use the router interface to select the options. The default is set for WiFi radio only. Power Internet WiFi LAN WAN 4G LTE Solid green The router is turned on and operating normally. Solid amber There has been a power-on self-test failure or device failure. Off Power is not supplied to the router. Solid green An Internet connection is established. Blinking green Data is being transmitted over the Internet connection. Blinking green and amber There has been a failover from WAN to mobile broadband. Off No Internet connection is detected. Solid blue The WiFi local port is initialized. Blinking blue Data is being transmitted or received over the WiFi link. Off The wireless access point is turned off. Solid green The local Ethernet ports have detected wired links with computers. Blinking Data is being transmitted or received. Off No link is detected on the Ethernet LAN ports. Solid green The Ethernet WAN port has detected an active link. Blinking Data is being transmitted or received. Off No link is detected on the Ethernet WAN port. Solid blue The router is in 4G LTE coverage. Off No coverage is detected. Hardware Setup 8
![](/manual_guide/products/netgear-mbr1515-user-manual-4dd39c8/8.png)