Netgear MBR1515 User Manual - Page 93
Factory Default Settings, Restore Factory Settings - lte router verizon
View all Netgear MBR1515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
LTE Broadband 11n Wireless Router MBR1515 Factory Default Settings Use the Restore Factory Settings button on the bottom of your router to reset all settings to their original factory default settings. This action is called a hard reset. To perform a hard reset, press and hold the Restore Factory Settings button for 6 seconds. Your router returns to the factory configuration settings that are shown in the following table. Feature Router login User login URL User name (case-sensitive) Login password (case-sensitive) Internet WAN MAC address connection WAN MTU size Port speed Local network (LAN) LAN IP Subnet mask RIP direction RIP version RIP authentication DHCP server DHCP starting IP address DHCP ending IP address DMZ Firewall Inbound communication from the Internet Outbound communication to the Internet) Source MAC filtering Broadband Internet connection mode settings Mobile Internet service provider broadband APN Access Number PDP type User name Default Behavior http://192.168.0.1 admin password Use default address 1500 AutoSense www.routerlogin.net 255.255.255.0 None Disabled None Enabled 192.168.0.2 192.168.0.254 Disabled Disabled (except traffic on port 80, the HTTP port) Enabled (all) Disabled Always use Mobile Broadband Connection Verizon vzwinternet *99***3# IPV4V6 None required Supplemental Information 93