Netgear MP101 MP101 User Manual - Page 13

User's Manual for the MP101 Digital Music Player - Install the MP101 Server Software to play music stored on your computers. - Install RHAPSODY Digital Music Service to take advantage of a 30-day free trial to play music from their vast collection of recordings. Note: RHAPSODY Digital Music Service is only available in the United States. - View Documentation Resources allows you to view a soft copy of the Installation Guide and this manual. 3. Follow the InstallShield Wizard steps, click Finish when done, and restart your computer as needed. 4. The Media Server software will automatically run. You can optionally scan your hard drive to locate your music files. Next, Connect the MP101 The MP101 Digital Music Player connects your home computer network to your audio system. 1. Connect the provided RCA cable from the MP101 Digital Music Player to your audio system. Alternately, you can connect headphones or powered speakers to the mini-jack output, which is volume controlled using the remote control. DIG IT A L ANTENNA Digital Music Player MP101 SERIAL Power 7.5VDC, 1.0A Reset Ethernet Audio Line Out Out L R MP101 Digital Music Player AU X CD/SACD M D/TAPE DV D V IDEO2 V IDEO1 S PEAKER S Receiver AC OUTLET 2. Connect the MP101 to your network. Note: The MP101 is set from the factory to automatically receive its network settings via DHCP. If DHCP is not running on your network, you will have to set up the IP address of the MP101 in the range of addresses on your network. - For Ethernet networks, connect via the Ethernet port. Setting Up the MP101 1-5