Netgear MR814 MR814v3 Reference Manual - Page 20
The Router’s Front Panel, MR814 v3 Front Panel, Table 2-1., Status Light Descriptions - power supply
UPC - 606449024524
View all Netgear MR814 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Reference Manual for the MR814 v3 Cable/DSL Wireless Router The Router's Front Panel The front panel of the MR814 v3 router contains the status lights described below. 0OWER 4EST 7IRELESS Figure 2-1: MR814 v3 Front Panel )NTERNET0ORT ,!.0ORT You can use the status lights to verify connections. Viewed from left to right, the table below describes the lights on the front panel of the router. Table 2-1. Status Light Descriptions Label Power Test Activity On Green Solid Off Blinking Off Wireless On Off Internet LAN On Blink On (Green) Blink (Green) On (Yellow) Blink (Yellow) Off Description Power is supplied to the router. Power is not supplied to the router. The router is performing its diagnostic test. The router successfully completed its diagnostic test. The Wireless port is initialized and the wireless feature is enabled. The wireless feature is turned off or there is a problem. The Internet port has detected a link with an attached device. Data is being transmitted or received by the Internet port. The LAN (local area network) port has detected link with a 100 Mbps device. Data is being transmitted or received at 100 Mbps. The Local port has detected link with a 10 Mbps device. Data is being transmitted or received at 10 Mbps. No link is detected on this port. 2-6 Introduction 202-10039-01