Netgear PL1010 Installation Guide - Page 10
Troubleshooting Tips - manual
View all Netgear PL1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Troubleshooting Tips Power LED is off. Power LED is amber. Pick A Plug LED is off. Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power saving mode occurs when the Ethernet LED is off. This can occur in the following circumstances: • The Ethernet cable is unplugged. • The device that is connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes. It returns to normal mode within two seconds after the Ethernet link is established. • If you already set network security, make sure that all Powerline devices are using the same encryption key; for information see the online user manual. • Press the Factory Reset button on each device for one second to return the Powerline adapter to its factory default settings. 10