Netgear PL1010 Installation Guide - Page 9
Customize Your Network Security - setup
View all Netgear PL1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
can temporarily disable Powerline communication. If this occurs, use the Factory Reset button to return the Powerline adapter to its factory default settings. Customize Your Network Security When you first set up your network, the setup uses a default encryption key common to all Homeplug AV-certified adapters. You can change this. ¾¾ To create a private secure network: 1. Wait until the Pick A Plug LEDs are lit. 2. Press the Security button for two seconds on one adapter, and then press the Security button on one of the other adapters for two seconds. Both buttons must be pressed within two minutes. Note: The Security button does not work in power saving mode (see Troubleshooting Tips on page 10). Warning: Do not press the Security button on the Powerline adapter until installation is complete and the adapters are communicating with each other (indicated by the Power LED). Pressing this button too soon can temporarily disable Powerline communication. If this occurs, use the Factory Reset button to return the Powerline adapter to its factory default settings. If you add adapters later, use this procedure to add the new adapters to your secure network. 9