Netgear PLP2000 Installation Guide - Page 10

Troubleshooting Tips Power LED is off. Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power LED is slowly blinking green. Power saving mode occurs when the Ethernet LED is off. This can occur in the following circumstances: • The Ethernet cable is unplugged. • The device connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes. It returns to normal mode within two seconds after the Ethernet link is up. Pick A Plug LED is off. • If you already set network security, make sure that all Powerline devices are using the same encryption key. See the online user manual for details. • Press and hold the Security/Factory Reset button for 8 to 10 seconds on each device to return the Powerline adapter to its factory default settings. 10