Netgear PS101v2 PS101v2 Installation Guide - Page 10

To con computers running Windows 95, 98, and Me

Get Netgear PS101v2 - Mini MFP Print Server PDF manuals and user guides View all Netgear PS101v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

To configure computers running Windows 95, 98, and Me: 1. Click Start, point to Programs> NETGEAR Print Server and click NETGEAR Add Printer Wizard. 2. Read, follow the instructions, and click OK in the Setup message window. 3. Select the port with the printer you connect and click Add in the Printer Select screen. When the AddPort screen shows, write down the port name ( such as PSFF0091_P1). Printer port name 4. Select the printer manufacturer on the left and the model on the right or, if you need to install the printer driver, click Have Disk and follow the instructions. 5. Click Next and select the print server in the Available ports list. This should match the port name from step 3. Then click Next. Note: Do NOT select the default port "LPT1." 6. Type a name for this printer and determine whether you want this as the default printer. 7. Select Yes when asked about printing a test page. 8. Click Finish. If you cannot print the test page, go to Troubleshooting on page 9. If you successfully printed the test page, you can configure other computers to access this printer by repeating procedure 4 on each computer. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
To configure computers running Windows 95, 98, and Me:
1.
Click Start, point to
Programs> NETGEAR Print Server
and click
NETGEAR Add Printer
Wizard.
2.
Read, follow the instructions, and click
OK
in the
Setup
message window.
3.
Select the port with the printer you connect and click
Add
in the
Printer Select
screen. When the
AddPort
screen shows, write down the port name ( such as
PSFF0091_P1).
Printer port name: _____________________________.
4.
Select the printer manufacturer on the left and the model
on the right or, if you need to install the printer driver,
click
Have Disk
and follow the instructions.
5.
Click
Next
and select the print server in the
Available ports
list. This should match the port
name from step 3. Then click
Next
.
Note:
Do NOT select the default port “LPT1.”
6.
Type a name for this printer and determine
whether you want this as the default printer.
7.
Select
Yes
when asked about printing a test page.
8.
Click
Finish
.
If you cannot print the test page, go to Troubleshooting on page 9.
If you successfully printed the test page, you can configure other computers to access this
printer by repeating procedure 4 on each computer.
8