Netgear RT338 RT338 Reference Manual - Page 120

Reference Guide for the Model RT338 ISDN Router To create a remote node: 1. Enter 11 from the Main Menu to display Menu 11 - Remote Node Setup. 2. Enter a remote node number (1 to 8) to edit the remote node and to display Submenu 11.1 - Remote Node Profile. Menu 11.1 - Remote Node Profile opens as shown in Figure 7-2. Menu 11.1 - Remote Node Profile Rem Node Name= ? Active= Yes Call Direction= Both Edit PPP Options= No Rem IP Addr= ? Edit IP= No Incoming: Rem Login= ? Rem Password= ? Rem CLID= Call Back= No Outgoing: My Login= My Password= ******** Authen= CHAP/PAP Pri Phone #= ? Sec Phone #= Telco Option: Transfer Type= 64K Allocated Budget(min)= Period(hr)= Carrier Access Code= Nailed-Up Connection= N/A Toll Period(sec)= 0 Session Options: Edit Filter Sets= No Idle Timeout(sec)= 300 Press ENTER to Confirm or ESC to Cancel: Figure 7-2. Menu 11.1 - Remote Node Profile 3. Edit the remote node settings with the desired changes. 4. At the bottom of Menu 11.1, press Enter to save Menu 11.1. Press [Esc] at any time to cancel your selections. Remote Node Configuration 7-3