Netgear WAC120 Installation Guide - Page 2

You can use these diagrams to connect your wireless access point or follow the detailed instructions in this booklet. Internet Option 1 1. Configure your access point for your network. For more information, see Set Up the Access Point on page 1. Access point Ethernet cable Modem Ethernet cable 2. Connect your modem to the Internet. 3. Connect your modem to the LAN port on the rear of the access point. Access point Network switch 1 2 3 4 Ethernet cable Internet Ethernet cable Option 2 1. Configure your access point for your network. For more information, see Set Up the Access Point on page 1. 2. Connect your modem to the Internet. 3. Connect your modem to a network switch. 4. Connect the access point to the same network switch. Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. To contact NETGEAR for support, visit http://support.netgear.com/general/contact or call (US only) 1-888-NETGEAR. In other countries, visit http://support.netgear.com/general/contact/default.aspx for phone numbers. For product updates and web support, visit http://support.netgear.com. NETGEAR recommends that you use only the official NETGEAR support resources. You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product's user interface.