Netgear WAG302 WAG302v2 Reference Manual - Page 21
Hardware Description, Front Panel - software
View all Netgear WAG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual Hardware Description This section describes the WAG302v2 front and rear hardware functions. Front Panel Figure 1-1 Viewed from left to right, the WAG302v2 has these status LEDs: PWR, TEST, LAN,802.11a WLAN, and 802.11g WLAN. LED Description PWR TEST LAN Power Indicator Off No power. If this LED does not come on with the power adapter and cord correctly installed, see Chapter 5, "Troubleshooting. On Power is on. Self Test Indicator Blink Indicates self test, loading software, or system fault (if continues). Note: This LED may blink for a minute before going off. Ethernet link indicator Off No connection detected on the Ethernet link Amber On 10 Mbps Ethernet link detected Amber Blink Data is being transmitted or received on the 10 Mbps Ethernet link Green On 100 Mbps Fast Ethernet link detected. Green Blink Data is being transmitted or received on the 100 Mbps Ethernet link Introduction 1-5 v1.0, May 2006