Netgear WAG511 WAG511 User Manual - Page 20

NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 User Manual WAG511 LEDs The two LEDs on the NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 indicate the condition of the wireless link. LED 1 Slow blink Alternate blink Slow blink Fast blink Off LED 2 OFF Alternate blink Slow blink Fast blink Off Meaning Power save mode (default from power up or reset) Looking for network association Associated or joined with network; no activity Associated or joined with network; blink rate increases with activity on the network over the air or locally on the network No power applied to the card Removing the WAG511 Software If necessary, you can remove the wireless adapter software in these two ways: • Navigate the Windows Start menu to the WAG511 Wireless PC Card program group, select the uninstall option, and follow the screen prompts. • Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select the WAG511 Wireless PC Card option, and follow the screen prompts. Upgrading the WAG511 Software Upgrades may be available at the NETGEAR website. To install an upgrade: 1. Write down the settings for any profiles that you want to save. They will not be retained. 2. Download the upgrade from the NETGEAR website Support page. 3. Remove the WAG511 software from your computer. 4. Remove the WAG511 adapter from your laptop computer, and if prompted restart your computer. 5. Run the installer that you downloaded (the file ends in .exe). 1-8 v4.0, March 2007