Netgear WAX610 User Manual - Page 42
WPA3 Personal, Passphrase, Apply, admin
View all Netgear WAX610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Insight Managed WiFi 6 AX1800 Dual Band Access Point Models WAX610 and WAX610Y • WPA3 Personal: This option allows only WiFi clients that support WPA3 to connect to the SSID. Select this option if all WiFi clients are capable of supporting WPA3. This option uses SAE encryption. In the Passphrase field, enter a new passphrase for the WiFi network. • WPA3/WPA2 Personal: This option allows both WPA2 and WPA3 WiFi clients to connect to the SSID. This option uses AES and SAE encryption. WPA2 clients use AES and WPA3 clients use SAE. In the Passphrase field, enter a new passphrase for the WiFi network. Note: After you complete the setup process, you can set up WPA2 Enterprise or WPA3 Enterprise security with RADIUS servers. For more information, see Change the authentication and encryption for a WiFi network on page 85. 8. Click the Apply button. Your settings are saved. A pop-up window displays the IP address and the new WiFi network and password (passphrase). If you specified a static IP address, save the IP address information because you must enter the IP address when you log in again. You are disconnected from the access point. If you changed the default country, the access point restarts. 9. Reconnect over WiFi to the access point's WiFi network using the new SSID and passphrase that you just defined on the Day Zero Easy Setup page. 10. Enter the access point IP address in the address bar of your browser. If you changed the IP address, enter the IP address that you specified in Step 6. Your browser might display a security warning because of the self-signed certificate on the access point, which is expected behavior. You can proceed, or add an exception for the security warning. For more information, see What to do if you get a browser security warning on page 55. A login window displays. 11. Enter the access point user name and password. The user name is admin. The password is the one that you just defined on the Day Zero Easy Setup page. The user name and password are case-sensitive. The Dashboard page displays. You can now customize the access point settings for your network environment. Install the Access Point in Your 42 Network and Access It for Initial Configuration User Manual