Netgear WB7620 User Manual - Page 357

ProSAFE Wireless Controller The following table describes the fields of the Client Details pop-up window. Item MAC Access Point BSSID SSID Frequency Auth Client Type Cipher AID RSSI Tx Power Tx Rate Tx Bytes Rx Rate Rx Bytes Tx packets Rx Packets Description The MAC address of the WiFi client. The name of the access point to which the WiFi client is connected. The MAC address of the access point's radio to which the WiFi client is connected. The WiFi network SSID that the WiFi client is using to connect to the access point. The channel frequency that the WiFi client is using to connect to the access point. The security mode that the WiFi client is using to connect to the access point (Open, WEP, WPA, WPA2, or WPA/WPA2). The wireless mode that the WiFi client is using to connect to the access point (802.11ng, 802.11bg, 802.11b, 802.11ac, 802.11na, or 802.11a). The type of encryption that the WiFi client is using (None, WEP, AES, TKIP, or TKIP + AES). The association ID of the client. The received signal strength indicator (RSSI) of the WiFi client. The transmit power of the WiFi client. The transmit rate in Mbps of the WiFi client. The number of bytes that the WiFi client transmitted. The receive rate in Mbps of the WiFi client. The number of bytes that the WiFi client received. The number of packets that the WiFi client transmitted. The number of packets that the WiFi client received. 12. Click the OK button. The Client Details pop-up window closes, and the Local Client List page displays again. Monitor Blacklisted Clients You can monitor all clients that were denied access to the network by all wireless controllers in the network. Note: Monitoring of blacklisted clients is supported on models WC7600 and WC9500 but not on models WC7500 and WC7600v2. Monitor the WiFi Network and Its Components 357