Netgear WG102 WG102 Reference Manual - Page 58
How to Con WPA2-PSK and WPA2-PSK, admin, password, Security Profiles Settings
UPC - 606449037678
View all Netgear WG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102 How to Configure WPA2-PSK and WPA2-PSK Note: Not all wireless adapters support WPA. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA. Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings. Note: Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. To configure WPA-PSK and WPA2-PSK, follow these steps: 1. Log in at the default LAN address of http://192.168.0.229 with the default user name of admin and default password of password, or using whatever LAN address and password you have set up. 2. Click Security Profiles Settings in the Security menu of the WG102, select the profile you choose to configure, and click Edit to view the Security Profiles Configuration menu. Figure 3-20: WEP/WPA Settings menu 3. Choose WPA-PSK and WPA2-PSK from the list. 4. Enter the pre-shared key passphrase. 5. Click Apply to save your settings. 3-32 November 2005 Basic Installation and Configuration