Netgear WG102 WG102 Reference Manual - Page 66
Upgrading the Wireless Access Point Software, Configuration File Management, Click Upload. - firmware download
UPC - 606449037678
View all Netgear WG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102 Upgrading the Wireless Access Point Software . Note: When uploading software to the WG102 Access Point, it is important not to interrupt the Web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, the upload may fail, corrupt the software, and render the WG102 completely inoperable. You cannot perform the firmware upgrade from a workstation connected to the WG102 via a wireless link. The firmware upgrade must be performed via a workstation connected to the WG102 via the Ethernet LAN interface. The software of the WG102 Access Point is stored in FLASH memory, and can be upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from the NETGEAR Web site. If the upgrade file is compressed (.ZIP file), you must first extract the image (.IMG) file before sending it to the wireless access point. The upgrade file can be sent using your browser. Note: The Web browser used to upload new firmware into the WG102 must support HTTP uploads, such as Microsoft Internet Explorer 6.0 or above, or Netscape Navigator 4.78 or above. 1. Download the new software file from NETGEAR, save it to your hard disk, and unzip it. 2. From the main menu Management section, click the Upgrade Firmware link to display the screen above. 3. In the Upgrade Firmware menu, click the Browse button and browse to the location of the image (.IMG) upgrade file. 4. Click Upload. When the upload completes, your wireless access point will automatically restart. The upgrade process typically takes about one minute. In some cases, you may need to reconfigure the wireless access point after upgrading. Configuration File Management The WG102 Access Point settings are stored in the wireless access point in a configuration file. This file can be saved (backed up) to a user's computer, retrieved (restored) from the user's computer, or cleared to factory default settings. 4-6 Management November 2005