Netgear WG302 WG302v1 Reference Manual - Page 34
DHCP Client., IP Address, IP Subnet Mask, By default - default ip address
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual Figure 2-7. 2. Enter the wireless access point name of the WG302: This unique name is the access point NetBIOS name. The default Access Point Name is located on the bottom label of WG302. The default is netgearxxxxxx, where xxxxxxx represents the last 6 digits of the WG302 MAC address. You may modify the default name with a unique name up to 15 characters long. 3. Enter the IP Address fields of the WG302: - DHCP Client. By default, the Dynamic Host Configuration Protocol (DHCP) client is disabled. If you have a DHCP server on your LAN and you enable DHCP, the wireless access point will get its IP address, subnet mask and default gateway settings automatically from the DHCP server on your network when you connect the WG302 to your LAN. - IP Address: The default IP address is 192.168.0.228. If you want to change it, enter an unused IP address from the address range used on your LAN; or enable DHCP. - IP Subnet Mask: Enter the subnet mask value used on your LAN. The default is 255.255.255.0. 2-10 v4.0, April 2006 Basic Installation and Configuration